Job Responsibilities:

1.Responsible for the application development of the cathodoluminescence product line ,paticipate in product development and upgrading.

2.Provide pre-sales technical support, including drafting and communicating technical proposals.

3.Responsible for cathodoluminescence system external analysis and testing services,including collecting samples, summarizing experimental data, and writing test service reports.

4.Based on user application requirements, propose product improvement suggestions, test new products, and assist in completing product improvements.

5. Responsible for the daily maintenance of laboratory instruments; assist in improving laboratory management systems and establishing testing service processes and standards.

6.Assist in writing and refining the company's product operation manuals, as well as recording experiments and troubleshooting issues.

7.Assist with on-site installation and operational guidance, and provide occasional training for users as part of after-sales service.

8.Assist in product marketing .

9.Complete other tasks assigned by the superior.

Qualifications:

1. Master's degree or above. Fresh graduates should have experience in electron microscope operation and understand the necessary knowledge related to electron microscope, more than 1 year SEM,TEM operation experience is preferred;

2.Materials, physics, geology, semiconductor and other related majors, understand the third-party laboratory work characteristics;

3.Proficiency in using office software for data and document management.

4.Strong learning ability, with the potential to master various software required for the role.

5.Excellent communication and teamwork skills.

6.Integrity, dedication, and a strong sense of responsibility.

Job Responsibilities:

1.According to the system functional requirements proposed FPGA design and implementation program, complete the demand demonstration;

2.Write, design, develop, simulate, and debug logic code according to module requirements and development specifications.

3.Implement parallel and serial data access for ADC/DAC interfaces, achieve Ethernet, DDR3 data storage, and PCIE data transfer (DMA) based on IP Core; complete cross-clock domain data access, partial data preprocessing, and business logic function implementation.

4.Collaborate with hardware and software teams for debugging and realization of product functionalities.

5.Analyze risk factors involved in system development activities, and prepare standardized technical documents, product descriptions, and patents related to design and development.

Qualifications:

1.Bachelor's degree or above,majoring in electronics, communications, measurement and control, automation and other related majors, more than 3 years of FPGA related work experience.

2.Proficient in Verilog language and capable of understanding VHDL code.

3.Familiar with FPGA development processes and design standards, and able to use simulation software such as Modelsim to complete pre- and post-simulation verification.

4.Proficient in using FPGA development tools, primarily Vivado, and familiar with the use of IP Cores, able to independently complete internal logic design verification and debugging.

5.Familiar with common local bus communication protocols such as SPI, IIC, and USART, with relevant experience in software and hardware debugging.

6.Experienced in implementing DDR3, Ethernet, PCIE, FIFO using Xilinx IP Core, with related debugging experience.

7.Good communication skills, teamwork, and dedication, strong learning ability and with a keen interest in product development, new technology applications, and technological innovation.

8.Preference will be given to candidates with experience in the development of data acquisition cards, oscilloscopes or other similar equipment.

Job Responsibilities:

1.Responsible for circuit design;

2.Handle product schematic design, PCB layout, hardware debugging, and maintenance; lead the completion of product functionality tests, reliability tests, and verification, as well as provide technical guidance for production testing.

3.Assist mechanical engineers in completing the internal structural design of products.

4.Responsible for writing technical development documentation.

Qualifications:

1.Bachelor's degree or above, majoring in electronics, communications, computer science and other related majors, more than 5 years of related work experience;

2.With analog and digital circuit design experience and product development capabilities; proficient in using common operational amplifiers, familiar with chip selection, mainstream MCU, FPGA and the designing peripheral circuits of ARM chips;

3.Proficient in using drawing software , familiar with common operations in Vivado, and experienced in using simulation software .

4.Familiar with signal conditioning circuits such as small signal amplification and constant current sources; knowledgeable in key parameters and selection principles for ADCs and DACs; experienced in power circuit design for analog circuits; experience in motor control drive circuit design is preferred.

5.Proficient in using common tools such as oscilloscopes, multimeters, signal generators, LCR meters, and spectrum analyzers; possesses some soldering skills and familiarity with circuit testing standards and processes.

6.Strong sense of responsibility, teamwork, and learning ability

Job Responsibilities:

1.Responsible for establishing the process system and writing process documents; identify the key quality control points and continuously improve and optimize them based on actual conditions.

2.Convert production drawings, monitor the production of samples, quality control, and the improvement of quantitative product processes.

3.Verify the feasibility of mass production for products, and improve trial production reports and related process documentation.

4.Analyze and resolve process issues in production, challenge existing processes, and provide reasonable improvement suggestions; improve processes that affect product quality orlow production efficiency to enhance overall production efficiency.

5.Assist in setting product standards,writing and revising related technical documentation according to the needs of product conversion projects.

6.Responsible for training and guiding production operators on process operations.

Qualifications:

1.Bachelor's degree or above, majoring in electrical, electronics, instrumentation or other related majors (experienced candidates may be considered with an junior degree).

2.More than 2 years of work experience in industries such as precision instruments, consumer electronics, or semiconductors; familiar with common electronic product process design flows, with experience in new product introduction and process engineering.

3.Strong communication skills, quality assurance awareness, and documentation writing ability.

Job Responsibilities:

1.Complete the mechanical structure design for precision instruments and the structural design of vacuum motion platforms.

2.Complete project drawing outputs, including 3D models, 2D drawings, BOM lists, technical documents, and handle the writing and archiving of related documentation.

3.Conduct analysis, optimization, and subsequent upgrades of structural designs.

4.Handle product assembly and debugging, resolve technical issues in design, assembly, and production processes, and provide technical support to quality and production departments.

5.Complete other tasks assigned by leaders.

Qualifications:

1.Positive and serious work attitude, strong sense of responsibility, good communication and cooperation skills, and coordination ability.

2.Bachelor's degree or above, master's degree is preferred. Majoring in mechanical design, mechatronics, optoelectronic engineering or other related majors;

3.Familiar with mechanical design, mechanical processing techniques and equipment; experience in the R & D of instruments equipment, with vacuum mechanical automation R & D project experience is preferred.

4.Proficient in using computer-aided design software .

Job Responsibilities:

1.Develop embedded systems for instruments and equipment, applicable to laser and electron beam scanning control, system interlock control, and automation control.

2.Collaborate with the hardware department to develop control modules; complete control of the baseboard ADC and DAC.

3.Work with the software department on module or system modulation and iterative development; ensure interaction between the lower-level and upper-level control systems.

4.Responsible for motor drive control and process control of the instruments.

5.Assist the testing department in conducting system functionality tests.

6.Responsible for writing technical documentation.

Qualifications:

1.Bachelor's degree or above, majoring in electronics, automation, optoelectronics, computer science, precision instruments, measurement and control or other related engineering majors.

2.Proficient in C or C++ programming languages and data structures.

3.Familiar with development on platforms like STM32, NXP, or ATMEL, with experience in developing real-time operating systems (RTOS) based on systems such as Nuttx, RT-Thread, FreeRTOS or ThreadX, and capable of optimizing system code.

4.Familiar with commonly used buses such as SPI, UART, IIC, and industrial control protocols like Modbus.

5.Knowledgeable in common motor and motor drive control methods, capable of implementing basic motion algorithms, and achieving precise displacement control with the help of sensors.

6.Familiar with the control of common ADC and DAC, with experience in analog data acquisition and processing is preferred.

7.Preferably experienced in developing systems related to laser direct writing, laser etching, 3D printing, focused ion beam, electron beam lithography, electron beam welding or electron beam additive manufacturing.

8.Experience with DSP and ARM development is preferred, as is experience in designing equipment interfaces.

Positive and serious work attitude, strong sense of responsibility, good communication and cooperation skills and coordination ability.